Residential Electrician Service

There are three types of Electrician Service. Basic, essential, and habitability. The latter category provides safety, such as lighting, ventilation, and heating.

The former provides the essential services in case of the loss of electric power or emergency situations, while the latter is primarily for routine day-to-day maintenance. The main drivers of this market are growing regulations for safety products, changing technology, and growing environmental awareness. The following are three of the most common types of electrical service.

The electrical service is concerned with the safety and proper functioning of electrical systems in buildings. It can cover residential, business, school, and institution structures.

To perform the electrical tasks safely, a qualified electrician is needed. In addition to residential services, electricity service includes subordinate services, such as exchanging electric energy and managing financial risk. Other subordinate services include load reimbursement and distribution access service. Once you’ve determined your requirements, you can call a residential electrician.

An electrician will attach a Type SE cable to the building. The wires must be raised to the appropriate ground clearance. This is called a masthead service, and the point of connection is elevated higher than the building.

It’s a good idea to have a professional inspect the electrical system on a yearly basis to ensure it is safe. This is an important part of the electrical process, so it’s best to get an electrician with experience and training.

Absolute Electric offers all types of electrical services. When you hire a professional, you’re paying for the best. If you don’t hire a professional, the results can be disastrous.

The worst thing that can happen is a loose connection or a naked wire. Luckily, there are plenty of companies offering all kinds of electrical services. They’re worth the money for the quality of the work. The benefits of choosing an electrician will outweigh the costs.

In North America, the most common type of commercial building electric service is 120/208 volt wye. This type of service provides power to outlets and plug loads that use 120 volts. The 240V version is a higher-voltage system. This means that a higher-voltage house can use more electricity at the same time.

The voltage used for residential electric service differs from city to city. If a homeowner is considering a switch, they should check if the switch is compatible with the desired power level.

An electrician can help you make the necessary changes if you are having an electrical emergency. The best way to change an existing electrical service is to call a professional and have them visit the site.

They’ll take notes and photos and will be able to advise on what’s best for your home. Depending on the nature of the job, an electrician may need to purchase replacement parts from a wholesale electrical supply company. If you’re hiring an electrical service provider to make a change, you should also make sure that they have the parts on hand to replace your existing wiring.

Advantage of Calling an Emergency Electrician in Cambria Heights, NY

Electrical mishaps are the most common problems in every household and business premises in Cambria Heights, NY. It is very tempting to deal with electric problems by yourself rather than wait for a professional, but that is not advisable. Some electric issues require immediate attention, especially those that put you and your family at risk of safety hazards. In such circumstances, you need to call in an emergency electrician.

At Absolute Electrical Service Inc., we offer 24/7 emergency electrical services to commercial, industrial and residential owners in Cambria Heights, NY, without the need for any prior appointment. Our electricians can advise or fix any urgent electrical problem that requires professional intervention at competitive prices.

When to Call an Emergency Electrician in Cambria Heights, NY

Electrical problems cannot be ignored and require immediate attention. Never take chances with an electric problem, and it is better to call professional emergency electricians and be safe than sorry. Some of the signs that show it is the right time to get an emergency electrical service include:

1. Exposed Wires or Damaged Cables

If you see any exposed electrical wires around your property, you need to contact a local emergency electrician. Keep everyone away from these wires, and do not attempt to handle the issue independently. It is advisable to shut off the power from the main switch to be safe before the professionals arrive.

2. Buzzing Sounds From a Breaker Box

Any sound coming from your breaker box should not be viewed as normal. Humming or buzzing sounds are normally an indication that your circuit breaker could be faulty or you have poor wiring. When problems originating from circuit breakers are ignored, they could expose a property to a wide variety of electrical failures. You should leave this electrical emergency to a professional and leave the guesswork to your local electrician.

3. Submerged Electrical Panel

Every property owner panics and worries about electrocution after a major water leak or flood. A damaged electrical panel sitting in water could lead to other electrical problems and cause property damage. Given the dangers associated with damaged cables sitting in water, switching off your electrical system is advisable before an emergency electrician comes in for assessment. Emergency electricians are always on standby for emergency electrical repairs during these times.

4. Burning Smells

If you experience an unidentified burning or smoke smell coming from your electric system, you should treat it as an electrical emergency. The scent normally resembles a burning plastic, indicating that you have damaged wires. If left unchecked, this electrical problem could lead to a fire.

The first thing you need to do before calling your local emergency electrician is switch off your mains. Your emergency electrician will check for underlying issues causing your wires to melt before making any electrical repair. You are also advised to contact the fire department to rule off imminent fires.

5. Overloaded Outlets

Do your in-home outlets remove sparks when plugging in appliances or have brown or blacked spots around them? That could be a sign that they are overloading. This problem should not be ignored as it puts your family in potential danger of getting an electrical shock. Avoid bigger problems by calling a qualified electrician.

6. Power Loss or Flickering Lights

You can lose power due to several reasons. If there is no major power blackout in your area, you need to find out the cause of the power loss. Additionally, you should not ignore when lights flicker regularly, or every time you plug in some appliances. Emergency electricians are well equipped to locate the source of the problem in such situations and handle the problems safely.

Advantages of Calling a Licensed Electrician During Electrical Emergencies

1. Safety

The number one goal of a professional emergency electrician is to ensure their clients’ safety during an electrical emergency. You may think you can save a few bucks by handling electrical issues yourself, but you are putting yourself and your family at risk.

Even the slightest error when handling electrical problems could mean fire, electrocution, and in worst cases, death. Hiring an emergency electrical service not only ensures your safety but also assures you that the job will be handled professionally and done correctly.

2. Instant response

Many electricians dealing with emergency electrical issues are available on a 24/7 basis. This means that you can call a qualified electrician to handle your electrical problems any day of the week, night time or daytime. Calling a licensed electrician will guarantee an instant response, which can save your property and even life.

3. Save money

Electrical problems cannot be ignored. If not given immediate attention, some electrical faults can cause more damage in the long run, forcing you to spend more on electrical repairs and installations. Hiring a professional electrician means spending extra on an emergency electrician cost and getting the problem fixed immediately and helps you save money from costly repairs.

4. No downtime

Electricity plays a great role in ensuring the smooth running of operations at home or in a business. Business owners especially know that time is of the essence, and they cannot afford to lose precious time because of electrical power loss. Stopping business operations due to emergency electrical issues can lead to a loss of revenue. Emergency electricians understand the importance of fixing electric problems quickly, and they work well under pressure to ensure their clients resume their normal operations in no time.

Why Choose Absolute Electrical Service INC. For Your Electrical Emergencies

At Absolute Electrical Service Inc., we have been offering commercial and residential property owners in Cambria Heights, NY with emergency electrical services since 1994. We have licensed and insured emergency electricians whose main concern is our clients’ safety. They are experienced and well equipped to handle emergency electrical repairs, alterations, and installations at all times. We offer an upfront, honest pricing estimate which guarantees satisfied customers. Our electricians are always on schedule and provide a fast turnaround time to ensure your power system is up and running in no time.

Do you have an electrical emergency? We have emergency electricians on call 24 hours a day, 7 days a week, and you can reach them on 718-229-9300. You can also visit us for more information about electrical emergencies.

What to Expect During Electrical Inspection in Cambria Heights, NY

Whether you are constructing a new building or doing a major remodeling over an existing space, an electrical inspection is crucial for staying in line with important building codes. Apart from helping you comply with necessary regulations, the process also ensures the safety of anyone who uses the property in the future. Indeed, electrical wiring, electrical panel matters, circuit breakers, and electrical components are integral parts of a well-functioning property. While residents may not think about the National Electrical Code or really think about circuit breakers, electrical panels, or other matters, the professionals must do so as they conduct an electrical home inspection.

The professional electrician will want to conduct electrical inspections and ensure that electrical wires are in order and that the right electrical repairs occur. If you are about to go through such an electrical home inspection, you might be wondering what the process actually entails. To help you learn more about the approach, here is a lowdown on what to expect during an electrical inspection in Cambria Heights, New York.

What Is an Electrical Inspection?

Is a home’s electrical system inspected periodically or merely once? What will the professional look for when it comes to electrical safety and electrical devices? Which knob and tube wiring or arc fault circuit interrupters will see inspection? How much time will it take to conduct an examination of the home’s electrical system?

These are all fantastic questions to ask when thinking about electrical safety, and it shows you how comprehensive the matter of electrical safety can be. An electrical inspection is a detailed assessment process that involves the examination of your property’s electrical fixtures, installation mechanism, and safety profile.

The process is required by your local building code’s office whenever you are performing any significant electrical work on your property. This essentially means that if you are constructing a new building or adding a major room to an existing property, you will need to go through this inspection to ensure that you are adhering to the required electrical codes.

In Cambria Heights, NY, the inspection is executed by a designated inspector who is well-versed with the Building Standards and Codes of NY. During the assessment, the inspector thoroughly analyzes the electrical work within your property. This makes sure that your electrical fixtures and installation is checked and approved by someone who is up to date with the pertinent electrical codes. If you pass the inspection, you are able to move forward with using the property as you see fit. But if you fail the assessment, you need to rework your electrical system until it is up to par with the required building codes. Our team at Absolute Electrical Service, Inc. is there for you when it comes to discussing electrical safety, electrical work, and electrical problems in your area. Contact us today to ensure that everything is functioning properly.

The Process of the Electrical Inspection in Cambria Heights, NY

Whenever you are going through an electrical inspection in Cambria Heights, NY, it is important to learn what type of steps will be involved with the process. This allows you to steer clear of any surprises while also helping you understand exactly what to expect with the inspection.

The process is divided into the following two phases:

  • Rough-in Inspection
  • Final Inspection

Rough-in Inspection

Rough-in inspection occurs when you are in the process of installing your electrical system within your property. By performing the inspection during this process, your designated inspector can easily examine electrical fixtures, wires, and conduits that are visible to the naked eye and are not covered by drywall or insulation.

If any required modifications are detected during this phase, you are informed of them through the inspector’s findings. This allows you to make the relevant changes without tearing your way through fixture coverings. In turn, this makes it easier for you to pass the next stage of inspections.

Final Inspection

After going through the rough-in inspection, you can install your drywalls and insulations over your electrical system. But after this process is complete, you need to have a final inspection where your electrical system is analyzed once again, especially with its approach to the overall safety of the building’s inhabitants.

The final inspection ensures that you followed any suggestions after the rough-in inspection without failure if you were given any suggestions. If you are unable to pass this step, you may need to make major constructional changes so that you can fully adhere to the recommendations.

Cost of an Electrical Inspection in Cambria Heights, NY

The cost for an electrical inspection in Cambria Heights, NY, ranges around $110 per session. But this is just a rough estimate and doesn’t paint an accurate picture of what it might cost you to schedule an inspection on your property. Since the actual cost of scheduling and receiving an inspection can vary, it is important that you reach out to reliable electrician services in the area for a direct quote. After shopping for quotes from different providers who can perform the inspection through a certified inspector, you can compare the offerings and go with the most suitable option.

In this process, you need to compare not only costs but also the experience, credibility, and reviews of the company that you are about to hire for the inspection process. This saves you from comparing apples and oranges and allows you to make an informed decision.

How to Prepare for Your Electrical Inspection

In order to prepare for your electrical inspection in Cambria Heights, NY, you need to have all required permits in place for your new construction or major remodeling. You should also make sure that you are working with an electrician who complies with the National Electric Code, New York State Building Code, as well as local building codes. This ensures that you are able to prepare for your electrical inspection without adding any further stress to your shoulders.

Frequently Asked Questions About the Electrical Inspection

Here are a few questions people may ask of electrical contractors, how to pass inspection, and general home inspection matters to electrical issues.

  • What Is an Electrical Inspection? An electrical inspection involves a comprehensive assessment of all electrical work that is installed within your property. The process takes place during new constructions as well as major remodeling or additions to your building.
  • What Is the Goal of an Electrical Inspection? The inspection aims to ensure that your electrical installation is up to the required building codes to ensure safety.
  • Who Performs the Electrical Inspection? The inspection is performed by a certified electrical inspector who is up to date with all required building codes such as the National Electric Code and New York State Building Code.
  • What Type of Steps Are There in an Electrical Inspection? An electrical inspection is categorized into two phases. The first rough-in inspection takes place without insulation or coverings over the electrical work. The final inspection occurs after all the fixtures, cables, and wires have been properly installed. This leads to a comprehensive assessment that ensures compliance with all related building codes.
  • How Much Does an Electrical Inspection Cost? The cost of an electrical inspection can vary, but it ranges around $110. For an accurate quote, it’s important that you reach out to reliable providers in the area.

Helpful Tips for Completing an Electrician’s Checklist

In order to pass the electrical inspection on the first go itself, you can keep the following best practices in mind. With the help of this checklist, you can pass your inspection with flying colors.

  • Have an ample amount of dedicated circuits for appliances, devices, and lighting.
  • Ensure proper installation and fastening mechanisms for all electrical boxes.
  • Make sure the electrical boxes are not too close to the floor and adhere to the required codes.
  • Follow the set requirements for clamping and arranging cables and wires.
  • Properly label your cables and wires for future reference and safety profile.
  • Use proper circuit and surge protection for your appliances and devices.

Work With Us at Absolute Electrical Service, Inc. Today

Going through an electrical inspection can be a highly daunting process. But with the help of a qualified electrical team, such as that at Absolute Electrical Service, Inc., you can simplify this otherwise challenging phase of building or expanding your property. Absolute Electrical Service Inc. of Long Island is a full-service electrical contractor offering the latest technology and advancements and specializing in repairs, alterations and installations. We have been serving the industrial, commercial, and residential communities within the Queens, Long Island, and greater New York Metropolitan area since 1994. To see how Absolute Electrical Service, Inc. solutions can help, don’t hesitate to contact us for a free quote today. We will be glad to understand your concerns and support you through your electrical inspection right away.

Benefits of Electrical Panel Upgrade in Cambria Heights, NY

Inevitably, your electrical panel will come to the end of its life, and you will need an electrical panel upgrade to keep the electricity coursing through your house regulated. Even if you maintain your property and take good care of your appliances, you may still need to upgrade your electrical system and home wiring.

Most homeowners avoid getting an electrical panel upgrade because they believe that such an upgrade is costly, or worse, needless. The truth is that an electrical panel upgrade is vitally important because now, more than ever, we are using more electricity, and your twenty-five-year-old panel may not be strong enough to handle the increase in energy requirements.

In this article, we get into the nitty-gritty of electrical panel upgrades. Read on to discover the necessity and value of investing in a new electrical panel.

What Is a Panel Upgrade?

A panel upgrade (PU) is a service that involves upgrading the existing electrical service to a new one with new circuit breakers. If the breakers in your electrical breaker box can no longer handle the additional electrical load, you may need a panel upgrade. Also, if you have an older breaker box, you may need to replace it to reduce the risk of an electrical fire in your house.

If you need to upgrade an electrical panel, you can count on Absolute Electrical Service, Inc. to do the job. Panel upgrades require work that an electrical contractor should complete. Our trained, licensed, and experienced electrical contractors can perform the job correctly the first time and ensure that the job is done in ordinance with power company regulations. Contact us today. When you need us, we are ready to assist you with any electrical project.

How Much Does a Panel Upgrade Cost?

The cost to upgrade to a 200 amp service panel is between $1,300 and $1,600. The retail price of a new electric panel ranges between $40 and $1,250; however, in some instances, your power company may need to install a new power supply or a new electric meter for about $200 to $500. Labor is the highest cost for most electrical work. Most electricians charge hourly rates of $40 to $100 per hour; therefore, you can expect to spend about $400 and $800 for labor costs.

Installing an electrical box outdoors or indoors costs around $800 to $4,000. In most homes, the electrical box is located outside the property where the electricity enters so that it is easy to find in case of an emergency.

If you are looking for superior residential electrical services at a competitive price, you have come to the right place. Absolute Electrical Service, Inc. offers great services, premium products, and skilled workers at a competitive price. With us, you do not have to break the bank to access our services.

Why Would I Need a Panel Upgrade?

You may need to upgrade your electrical panel if:

You Have a Fuse Box

If you have a fuse box, you should consider getting an upgrade. Old fuse boxes create additional safety concerns because they can be fire hazards. Moreover, they can be a reason why home insurance companies refuse to cover your home or give you the compensation you deserve if you get coverage.

You Are Adding Circuit Breakers

Circuit breakers work by breaking the circuit and preventing the flow of electricity when the current in a circuit gets too high. If you are adding circuit breakers in your home, you will need panel upgrades.

You are Installing New Appliances

 If you plan to install a major new appliance in your homes, such as a hot tub or an air conditioning system, your existing electrical panel may not cut it.

You Use Power Strips

Just like fuse boxes, many electrical panels cannot handle modern electrical usage. If you use extension cords or power strips in your home, this is a strong sign that you are using more power than your panel can handle.

You Notice Flickering Lights

If your lights flicker or dim regularly, it may indicate a faulty electrical panel since it is connected to the entire electrical system. Usually, when electrical connections begin to come undone, the lights in your home will start to flicker.

You Hear Crackling Sound Coming From the Fuse Box

If a crackling, sizzling, or buzzing noise is coming from your outlets, you may be due for an electrical upgrade.

Can I Upgrade My Electrical Panel Myself?

Since the biggest cost involved in a panel upgrade is labor, you may be tempted to cut costs by performing the upgrade yourself. We do not recommend doing the work yourself because you may not have the training and experience needed to handle electrical wiring, and it is just not worth taking the risk of serious injury to save a few bucks. Therefore, it is better to leave this work to a professional electrician from Absolute Electrical Service, Inc.

However, if you are a skilled electrician, the following steps will guide you through the process:

1.  Turn Off The Main Circuit Breaker

First, you need to cut the electricity to the electric panel by turning off the main circuit breaker. Next, ask the utility company to shut off the electrical cables to your home.

2.  Remove the Outer Panel

After you ensure that the utility company has turned off the circuit breaker, unscrew the outer panel. Once you have unscrewed the outer panel, take it out carefully to avoid touching the wires underneath. Avoid touching the two black wires that go into the panel from above because they are live.

3. Remove Wires

Before you remove the wires, label them as follows: live, neutral, and ground. After doing this, take the individual fuses or breakers out of the panel and set them aside. Remove the ground line attached to the ground bar, and then disconnect the neutral bar. Lastly, remove the main breaker. Use extra caution because this wire is live.

4. Prepare New Panel

Create space in the new breaker panel for the breakers, then connect the neutral wire to the neutral bar, the ground wire to the ground bar, and the ground bar to the neutral bar. Then attach the new panel to the wall, individual wires to individual breakers, and label all breakers with the correct house circuit to make your job easier should you need to repeat this process.

We do not recommend upgrading your electrical panel yourself because this is a complex process that requires a specific set of skills. A licensed electrician from Absolute Electrical Services, Inc. can handle the inspection process, get the necessary permits, and ensure that the job is done correctly and safely.

Is It Worth Upgrading an Electrical Panel?

Upgrading an Electrical Panel is a worthwhile investment because it keeps your home safe. Home electrical fires account for around 51,000 each year, resulting in over 500 deaths each year. These fires are mainly caused by overwhelmed or outdated panels.

Having such panels put you, your family, and your home at risk; therefore, upgrading your panel is a worthwhile investment protecting you from fires. Panel upgrades also eliminate the risk of overloaded circuits and keep your electrical system functioning at its best.

Contact Absolute Electrical Service, INC. For Electrical Panel Upgrade in Cambria Heights, NY

Absolute Electrical Service, Inc. is a full-service electrical contractor that serves the greater New York Metropolitan area. We perform minor service upgrades such as expanding your existing panel with a sub panel and major and more complex upgrades such as replacing aging panels with new panels that allow for higher energy capacity.

Our upgrades bring about various attractive benefits, such as improved electrical performance,   improved electrical system safety, and improved home safety. So, if you are a homeowner or business owner looking for premium electrical services, get in touch with us today, and we will start working on your property to ensure that your electrical systems are functioning as they should be. We will also help you avoid issues with homeowners insurance eliminate concerns with outdated equipment.

Contact our Nassau office at 516-520-4700, our Queens office at 718-229-9300, and our Suffolk office at 631-567-1500. You can trust us with your minor or major electrical service upgrade.

Signs That your Business needs Electrical Services in Cambria Heights, NY

Signs That Your Commercial Space Needs Electrical Services in Cambria Heights, NY.

One of the top causes of structural fires in the United States is faults in electrical work. It is therefore important to make sure that your property has high-quality work. Whether residential or commercial, this should not only apply during electrical inspections. Observe safety all through for the sake of your family and office staff.

For the safety of your property, you need to get quality electrical services. Electrical services refer to the installation, repair, and maintenance of electrical devices. These services are essential for industrial, commercial, and residential purposes.

For quality work, make sure you engage the right electrical services. With so many businesses offering electrical services, make sure you get the right one.

Differences Between Industrial, Residential, and Commercial Electrical Services 

It may seem like all electricians do the same electrical work, only on a different scale. However, there are some differences between them. Industrial electricians are highly trained to deal with machinery.

Both residential and commercial electricians complete the wiring on new construction and perform general electrical services. However, residential electricians focus on electric code requirements for homeowners, buyers, and sellers. Commercial electricians focus on electric requirements and code specific to commercial buildings.

Signs That You Need Electrical Repairs and Maintenance

To the non-professional eye, signs of electrical damage may not be obvious. However, it is important to know what they are. It will help you keep your home or business safe and secure. It is also crucial if you own a commercial space with office staff and customers.

It is not enough to inspect the electrical system yourself. Get a highly trained electrician to check for any electrical problems. If there is any indication of damage, contact a fully licensed electrical contractor as soon as possible.

Frequent Tripping of the Circuit Breaker

You will find your circuit breaker in your electrical panel. It protects your property from large electrical surges. Surges can happen during lightning strikes or a power grid switching. The most common occurrence is when you use high-power electrical devices.

Circuit breakers can be reset, but most times, you will have to replace fuses. If it continues happening frequently, then it is an indicator of a wiring issue. As you repair your wiring, ensure you check your ground fault circuit interrupter (GFCI).

GFCI outlets constantly monitor the electrical circuit. When they detect even a slight flow of electricity to a grounded item, they stop the flow of electricity. It protects your office staff from electrocution. If you repair your wiring and GFCI outlets and the issue continues, you will need to install surge protectors.

There are three types. Each protects your property against different threats. It is not always necessary to have all three, but it is important to understand how they work. It will inform your choice on which you need.

In addition to a type one service entrance surge protector, your property should have a type two surge protector. These are the whole house surge protectors. Their installation is inside the electrical panel. They protect all the circuits on your property, and you can install more than one.

You can have one on the main circuit breaker. Install the other on any circuit that operates high-current appliances. They protect against both larger and smaller surges and are essential in smart home systems.

Small Electric Shocks

These are usually indicators of faulty or outdated electric appliances and outlets. If they are faulty, repair them. If not, then you need an upgrade. Outdated outlets are usually two-prong. Nowadays, outlets have three prongs. The third is for the ground wire. It acts as an additional safety barrier. It gives an unstable current passage to the ground.

Improper Electrical Wiring

You may leave some cables, specialized lighting, and additional equipment on the floor as you expand or renovate. These can cause your office staff to trip and hurt themselves badly. They can also cause an electrical fire. Get an electrician with the expertise to lay cables and properly organize your office space.

Wear And Tear In Your Electrical System

With time, the wiring in your property starts to wear down and fray, From electrical panels to electrical outlets, light fixtures, and machine points. It could be a result of high heat in the wiring, pests, or just deterioration. It is important to get an electrician to look at it as soon as possible. Let him also check your ceiling fans, smoke detectors, and light fixture for wear and tear.

Burning Smell, Sparks, and Warm Electrical Outlets 

Take action as soon as you notice any of the above. Do not wait to see if the electrical problem will resolve itself. Unplug all devices and get a trained electrician to look at them. When getting an electrical contractor, make sure they are licensed and insured.

Flickering Lights

Flickering lights can sometimes lead to blackouts. They can also affect your vision and cause headaches in addition to other conditions. Lights may flicker due to the use of heavy-duty electrical appliances. Although this might be the case, have an electrician look at the issue. It may be an issue of wear and tear or damage from mice and rats.

Considering Energy Efficiency

Even if your system seems to be in order, some of the above issues could be unseen. They could be leading to higher electrical bills. It is therefore important to make sure that your home or business property is up to standard.

Have a team of properly trained technicians to check your building regularly. It will help detect electrical problems early before they become major issues. If your system is up to standard, then an upgrade is also in order. It will ensure energy efficiency. This work will require installation services, therefore, involve a licensed and insured electrical contractor.

After the upgrade, ensure that you regularly service your machinery and equipment. The technicians also need to check your system from time to time. It will prolong the life of your equipment, lower energy consumption, and assist in lowering your bills.


Reach Out to Absolute Electrical Service, Inc for Commercial Electrical Services

Having an electrical system that works smoothly and reliably helps your business run efficiently. A business that runs efficiently can make more profits. Absolute Electrical Service, Inc. serves the greater New York metropolitan area. Our team has the training and expertise you need. There is no job too small or too big for us, and emergency services are always available. We offer industrial, commercial, and residential electrical services. Call Absolute Electrical Service, Inc today or visit our offices in Queens, Nassau, and Suffolk.